Image shown may not be actual product

AA941-156HV

LMI Pumps AA941-156HV Series AA Chemical Metering Pump, 0.58 GPH @ 250 PSI, 1/4" OD Tubing, 115 VAC, Acrylic Head, 316 SS Balls, Flourofilm Liquifram, Hypalon Seal Rings, 4-20 Ma Input, 12 Lbs

Brand: LMI

Series:

Series AA

Item: AA941-156HV

Request a Quote

Ships within 1 business day (in-stock items). Delivery typically 1-5 business days.

Returns accepted within 30 days. View Returns Policy

Estimate Shipping

Zip Code

Overview

LMI Pumps AA941-156HV Series AA Chemical Metering Pump, 0.58 GPH @ 250 PSI, 1/4" OD Tubing, 115 VAC, Acrylic Head, 316 SS Balls, Flourofilm Liquifram, Hypalon Seal Rings, 4-20 Ma Input, 12 Lbs

Literature & Manuals

Find the manuals, product sheets and all the information you need

Type	Title	Link
Data Sheets	LMI Series AA Electronic Metering Pump Data Sheet	View
Data Sheets	LMI Series AA Electronic Metering Pump Specification Sheet	View
Parts Breakdowns	LE 156 LE 156HV LMI Pump Liquid End Sheet Parts Exploded View Diagram	View
Parts Breakdowns	LMI Pumps AA9 Drive Assembly Exploded View Parts Diagram	View

Series Information

Series AA Information

General Description
Chemical metering pumps shall be positive displacement, Liquifram“ type pumps that are UL, CUL and CE approved. Output volume shall be adjustable while pumps are in operation from zero to maximum capacity of: AA17, AA77, AA97 - 0.42 GPH (1.6 liters per hour) AA14, AA74, AA94 - 0.58 GPH (2.2 liters per hour) AA18, AA78 - 0.75 GPH (2.8 liters per hour) AA15, AA75, AA95 - 1.0 GPH (3.8 liters per hour) AA16, AA76, AA96 - 2.0 GPH (7.6 liters per hour) Chemical metering pumps shall be capable, without a hydraulically backed diaphragm, of injecting solutions against pressures up to: AA14, AA74, AA94 - 250 psig (17.3 bar) AA17, AA77, AA97 - 140 psig (9.7 bar) AA15, AA75, AA95 - 110 psig (7.6 bar) AA18, AA78 - 80 psig (5.5 bar) AA16, AA76, AA96 - 50 psig (3.5 bar)
Pump Controls
Adjustment shall be by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are to be located opposite the liquid handling end. On-off switch shall be integral with frequency control, "off" position to be below lowest frequency setting.
Drive Assembly
The pump drive shall be totally enclosed with no exposed moving parts. Solid state electronic pulser shall be fully encapsulated and supplied with quick connect terminals at least 3/16" (4.75 mm) wide. Electronics shall be housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Electrical power consumption shall not exceed 22 watts per hour under full speed and maximum pressure conditions.Pump weight shall not exceed 14 lbs (6.5 kg).
Pressure Relief
To eliminate need for pressure relief valve, Liquifram TM shall automatically stop pulsating when discharge pressure exceeds pump pressure rating by not more than 35%.
Materials of Construction
Chemical metering pump housing shall be of chemically resistant glass fiber reinforced thermoplastic. All exposed fasteners shall be stainless steel. Chemical metering pump valves shall be ball type, with Ceramic Balls. Valve seat and seal ring shall be renewable by replacing the combination seat-seal ring or cartridge valve assembly. Pump head shall be of transparent acrylic material capable of resisting the pumped chemical. Fittings and connectionsat pump head shall be PVC.
Check Valve / Tubing Connections
A total of 16 ft (4.8 m) of polyethylene Tubing shall be provided per pump complete with compression connections. A foot valve with integral one piece strainer shall be provided for the suction line, and an injection check/back pressure valve with 1/2" NPT male connection for the injection point. The injection check valve shall incorporate a dilating orifice which prohibits scale formation and accumulation of crystalline deposits.

Related Products and Parts

Popular Series

Series associated to this product and brand

Type

Title

Link

LMI Series AA Electronic Metering Pump Data Sheet

View

LMI Series AA Electronic Metering Pump Specification Sheet

View

LE 156 LE 156HV LMI Pump Liquid End Sheet Parts Exploded View Diagram

View

LMI Pumps AA9 Drive Assembly Exploded View Parts Diagram

View

General Description

Chemical metering pumps shall be positive displacement, Liquifram“ type pumps that are UL, CUL and CE approved. Output volume shall be adjustable while pumps are in operation from zero to maximum capacity of:

AA17, AA77, AA97 - 0.42 GPH (1.6 liters per hour)
AA14, AA74, AA94 - 0.58 GPH (2.2 liters per hour)
AA18, AA78 - 0.75 GPH (2.8 liters per hour)
AA15, AA75, AA95 - 1.0 GPH (3.8 liters per hour)
AA16, AA76, AA96 - 2.0 GPH (7.6 liters per hour)

Chemical metering pumps shall be capable, without a hydraulically backed diaphragm, of injecting solutions against pressures up to:

AA14, AA74, AA94 - 250 psig (17.3 bar)
AA17, AA77, AA97 - 140 psig (9.7 bar)
AA15, AA75, AA95 - 110 psig (7.6 bar)
AA18, AA78 - 80 psig (5.5 bar)
AA16, AA76, AA96 - 50 psig (3.5 bar)

Pump Controls

Adjustment shall be by means of readily accessible dial knobs, one for changing stroke length and the other for changing stroke frequency. Both knobs are to be located opposite the liquid handling end. On-off switch shall be integral with frequency control, "off" position to be below lowest frequency setting.

Drive Assembly

The pump drive shall be totally enclosed with no exposed moving parts. Solid state electronic pulser shall be fully encapsulated and supplied with quick connect terminals at least 3/16" (4.75 mm) wide. Electronics shall be housed in chemical resistant enclosure at the rear of the pump for maximum protection against chemical spillage. Electrical power consumption shall not exceed 22 watts per hour under full speed and maximum pressure conditions.Pump weight shall not exceed 14 lbs (6.5 kg).

Pressure Relief

To eliminate need for pressure relief valve, Liquifram TM shall automatically stop pulsating when discharge pressure exceeds pump pressure rating by not more than 35%.

Materials of Construction

Chemical metering pump housing shall be of chemically resistant glass fiber reinforced thermoplastic. All exposed fasteners shall be stainless steel. Chemical metering pump valves shall be ball type, with Ceramic Balls. Valve seat and seal ring shall be renewable by replacing the combination seat-seal ring or cartridge valve assembly. Pump head shall be of transparent acrylic material capable of resisting the pumped chemical. Fittings and connectionsat pump head shall be PVC.

Check Valve / Tubing Connections

A total of 16 ft (4.8 m) of polyethylene Tubing shall be provided per pump complete with compression connections. A foot valve with integral one piece strainer shall be provided for the suction line, and an injection check/back pressure valve with 1/2" NPT male connection for the injection point. The injection check valve shall incorporate a dilating orifice which prohibits scale formation and accumulation of crystalline deposits.