MWS3775120T

Myers MWS37 Features & Benefits:
Bearing and Mechanical Seal – Permanently lubricated for long life.
Overload Protection – Built-in thermal overload with automatic reset.
Stainless Steel Hardware – Allows for easy disassembly after extended service.

Myers MWS37 General Specifications:
Applications: Sewage and Wastewater Removal
Capacities: 135 GPM 510 LPM
Shut-off head: 29’ 8.8 m
Operation: Tethered:: On: 20” 508 mm | Off: 11” 279.4 mm
Solids handling: 2” 50.8 mm
Intermittent liquid temp: 130°F 55°C
Motor: 1/2 and 3/4 HP, 1725 RPM, 115 or 230 Volt, single-phase, 60Hz. Oil-filled. Permanent split capacitor. Built-in thermal overload protection with automatic reset.
Acceptable pH range: 6-9
Shaft seal: Type 6A or equal, Buna-N elastomers, silicon carbide seal faces, stainless steel metal parts.
Motor housing: Cast Iron
Volute case: Cast Iron
Impeller: Cast Iron Vortex
Power cord: Single phase: 20’ oil and water resistant 3 wire 16-3 SJTW-A/SJTW with UL listed integrally grounded three-prong plug.
Discharge, NPT: 3”