MWS550110T

Myers MWS5 Features & Benefits:
Solids Handling – 2” spherical capabilities.
Overload Protection – Built-in thermal overload with automatic reset.
Bearing and Mechanical Seal – Permanently lubricated for long life.
Stainless Steel Hardware – Allows for easy disassembly after extended service.
Serviceability – Heavy-duty lift-out ring.
Controls – Standard controls available for automatic operation.
Cord Design – In-field replaceable 50’ cord available, 115 volt only.

Myers MWS5 General Specifications:
Solids handling: 2” 50.8 mm
Intermittent liquid temp: 130°F 54.4°C
Motor: 1/2 HP, 1550 RPM, 115 Volt or 230 Volt, single-phase, 60Hz. Oil-filled. Built-in thermal overload protection with automatic reset.
Acceptable pH range: 5-9
Shaft seal: Type 6A Carbon and Ceramic
Motor housing: Cast Iron
Volute case: Cast Iron
Impeller: Vortex reinforced Noryl® with brass threaded insert
Power cord: 10’ or 20’ water resistant 16-3 SJTW-A/SJTW with integrally grounded three-prong plug
Discharge, NPT: 2"
Operation: Tethered:: On: 16” 406.4 mm | Off: 7” 177.8 mm
Shut-off head: 18’ 5.5 m
Capacities: 130 GPM 492 LPM
Applications: Sewage, Effluent and Wastewater Removal and Transfer, Sump Drainage, Dewatering, Flood Control