104-02406-0000

Purchasing a PumpWorks ANSI Liquid End Kit is a strategic move that goes beyond a simple repair. These kits should be purchased during four specific operational scenarios to maximize cost savings and reliability.

---

1. When Your Current Pump Suffers "Wet End" Damage

If you open a pump and see that the casing is pitted, the impeller vanes are eroded, or the seal chamber is scored, a Liquid End Kit is the fastest way to recover.

• Why buy a kit? Buying individual components (casing, impeller, seal chamber, gaskets, and hardware) is significantly more expensive than the bundled kit. It also ensures you don't forget small but critical hardware during the rebuild.

2. During a Material Upgrade (Carbon Steel vs. Cast Iron)

If you are currently running standard ductile iron or cast iron pumps and experiencing frequent failures due to corrosion or impact, you should purchase these kits to upgrade your "installed base."

• Why buy a kit? PumpWorks kits are 100% interchangeable with other major brands like the Goulds 3196 or Durco Mark 3. You can swap out an inferior iron liquid end for a high-strength Carbon Steel assembly without replacing the entire pump or piping.

3. To Reduce Emergency Downtime (Stocking for Critical Spares)

For critical processes where a pump failure costs thousands of dollars per hour, you should purchase a kit to keep in your On-Site Inventory.

• Why buy a kit? Replacing a "wet end" from a kit is 70% faster than rebuilding a pump from scratch using individual parts. Your maintenance team can perform a "drop-in" replacement, getting the process back online while they refurbish the old parts later.

4. When Performance Drops (Efficiency Restoration)

Over time, internal clearances widen due to wear, causing a drop in flow and head pressure. This forces your motor to work harder, increasing energy costs.

• Why buy a kit? A kit resets all internal clearances to factory-perfect tolerances. This restores the pump's Best Efficiency Point (BEP), which can pay for the kit itself through energy savings and reduced vibration.

---

Summary Checklist: Should you buy a kit?

Scenario	Recommended Action
Pitting > 1/8" deep on casing	Buy Kit (Safety/Reliability)
Frequent impeller failures	Buy Kit (Material Upgrade)
High-cost "Critical" Pump	Buy Kit (Emergency Spare)
Visible vibration/Efficiency loss	Buy Kit (Performance Restore)