MIscellaneous pumps Manufactured by Graco Inc. 

HUSKY 1050 SERIES — 1" DIAPHRAGM PUMPS

Air‑Operated • Electric Air‑Charged • High‑Pressure 2:1

Series Overview

• 1" diaphragm pump series with three variants:
  1050 (Pneumatic) • 1050e (Electric Air‑Charged) • 1050HP (High‑Pressure 2:1)
• Common fluid section architecture across all variants
• Wetted materials: Aluminum, Stainless Steel, Hastelloy, Polypropylene, Conductive Polypropylene, PVDF
• Elastomers: Buna‑N, Santoprene, Geolast, PTFE, FKM, Polychloroprene
• Self‑priming, runs dry, no rotating seals
• Handles up to 1/8 in (3.2 mm) solids

Key Features

• Low‑pulsation operation across all variants
  • Pneumatic: stall‑free modular air valve
  • Electric: air‑charged drive reduces pulsation without dampeners
  • HP: spring‑loaded pilots for fast changeover
• Extended diaphragm life
  • Up to 5× longer vs. competitive AODDs
  • Air‑charged drive (1050e) increases life
  • Additional diaphragm layer (1050HP) for high‑pressure durability
• Selectable performance modes (1050HP)
  • Operate as a standard AODD or a 2:1 high‑pressure pump
  • Low‑pressure mode reduces air consumption up to 50%
• Efficiency advantages
  • 1050: ~30% more efficient than market leader
  • 1050e: up to 5× energy savings vs. pneumatic
  • 1050HP: high pressure without sacrificing flow
• Serviceability
  • Externally serviceable pilots (air models)
  • Modular, lube‑free air valve (air models)
  • Shared wetted parts across variants reduce inventory
• Compliance & configuration

• ATEX configurations available
• Multiple motor/gearbox options for 1050e (AC, ATEX, XP, BLDC, NEMA, IEC)

Fluid Ports

• Metal Models (Aluminum, Stainless Steel, Hastelloy):
  • 1 in. NPT(F) or 1 in. BSPT(F)
  • Stainless steel center‑flange models available with 1 in. ANSI/DIN raised‑face flanges
• Plastic Models (Polypropylene, Conductive Polypropylene, PVDF):
  • 1 in. ANSI/DIN raised‑face flange
• Manifolds are reversible to change inlet/outlet orientation
• Unused ports are plugged where applicable

Mounting & Orientation

• Mount pump horizontally with feet at the bottom
• Ensure mounting surface supports pump weight and operational load
• Maintain clear access to air inlet, fluid inlet, fluid outlet, and air valve
• Avoid vertical or wall mounting
• 1050HP requires adequate air supply for high‑pressure mode
• 1050e requires clearance for motor/gearbox ventilation and wiring

Grounding

• Required when operating in hazardous, flammable, or static‑sensitive environments
• Metal pumps (Aluminum, Stainless Steel, Hastelloy) include a grounding screw for static discharge
• Plastic pumps (PP, CP, PVDF) only require grounding when used in applications where static buildup is a risk
• Ground air and fluid hoses when grounding is required
• 1050e models follow motor/drive electrical grounding requirements (per UL/CE), separate from static grounding
• Verify system continuity when grounding is used

Applications

• General Transfer: chemicals, solvents, coatings, inks, wastewater
• Shear‑Sensitive Fluids: paints, resins, specialty chemicals (1050e)
• Abrasive Slurries: ceramics, mining, wastewater solids
• High‑Pressure Requirements:
  • Filter press feed
  • Long hose runs
  • High‑pressure spray systems (1050HP)
• Energy‑Sensitive Facilities:
  • Plants reducing compressed‑air usage (1050e)
• Hazardous / ATEX Environments:

• All variants available with compliant configuration

HUSKY 15120 SERIES

OVERVIEW & FEATURES

• Top Performance: 1.5 in (38.1 mm) AODD pump delivering the highest flow rate in its class—up to 122 gpm (462 lpm)—in a compact, portable frame.

• Superior Efficiency: Up to 40% more efficient than comparable pumps, with a fluid pressure rating of 125 psi (8.6 bar).

• Leak Prevention: One-piece polypropylene center section eliminates leak points and reduces maintenance requirements.

• Smooth Operation: Stall-free, low-pulsation air valve ensures rapid changeover and consistent flow without lubrication.

• Extended Life: Diaphragm platform rated for up to 5× longer life; includes overmolded options for maximum durability.

• Compliance: All materials are FDA-compliant per CFR Title 21 (Sections 177.1520, 177.1550, and 177.2600).

FLUID PORTS

• Air Ports: 1/2 in npt(f) inlet; 1 in exhaust.

• Fluid Inlet/Outlet: 1.5 in (38 mm) ANSI/DIN flange (center- and end-porting configurations available).

MATERIALS

• Air Motor: Polypropylene.

• Fluid Section: Polypropylene or PVDF.

• Wetted Parts (Seats/Balls/Diaphragms):

• Seats: Polypropylene, PVDF, Santoprene®, or Stainless steel.

• Balls: FKM, PTFE, Santoprene®, or Stainless steel.

• Diaphragms: FKM, PTFE/EPDM overmolded, PTFE/Santoprene two-piece, or Santoprene®.

• Seals: PTFE, Santoprene®, or PTFE/EPDM overmolded.

AIR SYSTEM & INSTALLATION

• Operation: Pneumatic drive (20–125 psi) with a lube-free design that simplifies air supply setup.

• Serviceability: Quick-access air valve and diaphragms; standard AODD mounting footprint for easy integration.

• Reliability: Seal-less design eliminates mechanical seal failures and reduces alignment sensitivity during installation.

APPLICATIONS

• Chemical and industrial fluid transfer, wastewater/slurries, abrasive or solids-bearing materials, and high-flow portable transfer in corrosive environments.

TECHNICAL DATA

• Max Press/Flow: 125 psi (8.6 bar) | 122 gpm (462 lpm).

• Suction/Solids: 31 ft (9.4 m) wet lift / 16 ft (4.9 m) dry lift | 1/4 in (6.3 mm) max solids.

• Consumption: 43 scfm @ 70 psi/60 gpm; 85 scfm max.

• Volume per Cycle: 0.63–0.66 gal (2.3–2.5 L).

• Noise Level: 83.6 dBa @ 70 psi; 95.7 dBa @ 100 psi.

HUSKY 1590 SERIES

OVERVIEW & FEATURES

• Industrial Capacity: 1.5 in (38 mm) AODD pump designed for high-volume transfer and broad chemical compatibility.

• Online Serviceable: Patented closed-center air valve reduces stalling and is externally accessible for fast, on-line service.

• Extreme Durability: Up to 5× longer diaphragm life compared to industry peers; epoxy-coated air section protects against harsh environments.

• Reliable Design: Seal-less architecture eliminates mechanical seal failures; simplified construction uses fewer parts for better reliability.

• Flexible Porting: Offers both center- and end-porting configurations to fit various piping requirements.

• Silent & Safe: Quiet operation with remote muffler capability; ATEX-ready configurations available for hazardous zones.

FLUID PORTS

• Air Inlet: 1/2 npt(f).

• Fluid Inlet/Outlet: 1.5 npt(f); optional BSPT or flanged configurations available.

MATERIALS

• Air Motor: Aluminum (standard) or Stainless Steel (remote/certified variants).

• Fluid Section: Aluminum or Stainless Steel (model dependent).

• Wetted Parts (Seats/Balls/Diaphragms):

• Seats: TPE, Buna-N, PTFE, Santoprene®, Stainless steel (316 or 440C).

• Balls: Acetal, Buna-N, PTFE, Santoprene®, Stainless steel (440C).

• Diaphragms: TPE, Buna-N, PTFE / EPDM overmolded, Santoprene®, Geolast®.

AIR SYSTEM & MOUNTING

• Pressure Range: 20–120 psi (1.4–8 bar); Air consumption: 50 cfm at 70 psi / 60 gpm.

• Installation: Standard AODD mounting footprint; noise further reduced with optional Rubber Foot Kit.

APPLICATIONS

• Industrial/chemical transfer, wastewater, solids-bearing fluids, and fast-service installations in harsh or low-noise environments.

TECHNICAL DATA

• Max Press/Flow: 120 psi (8 bar) | 100 gpm (378.5 l/min).

• Speed/Volume: 200 cpm | 0.5 gal (1.9 L) per cycle.

• Max Solids: 1/8 in (3.18 mm).

• Sound Level: 108 dBa sound power level.

HUSKY 205 SERIES

OVERVIEW & FEATURES

• Compact Design: 1/4-in end-porting AODD pump optimized for OEM skids and compact industrial systems.

• Versatile Orientation: Spring-loaded check valves ensure superior priming and allow the pump to operate in any mounting orientation.

• Flexible Porting: Features interchangeable inlet/outlet porting with manifolds on both ends for easy integration.

• Reliable Operation: Self-priming, runs dry without damage, and stalls under pressure to prevent system failure.

• Control Options: Supports standard internal air valve or remote-solenoid operation for automated systems.

• Maintenance: Lube-free air valve system with full external serviceability for both the air and fluid sections.

FLUID PORTS & MOUNTING

• Connections: 1/4-in end-porting; IN and OUT ports on both ends (interchangeable).

• Priming Note: OUT port must be mounted up for proper priming; unused ports must be plugged.

• Installation: Includes 90° mounting bracket; requires a stable, vibration-free surface.

• Protection: Polypropylene components require protection from prolonged UV exposure.

MATERIALS & WETTED PARTS

• Fluid Section: Polypropylene, Acetal (conductive SS fibers), or PVDF.

• Wetted Parts (Seats/Balls/Diaphragms):

• Seats/Balls: Spring-loaded check valves (standard); weighted check options available; ball/seat materials vary by model.

• Diaphragms: True-formed PTFE or Santoprene.

• Elastomers: Santoprene, PTFE, Buna, FKM, Polychloroprene, TPE, G.E.T.

AIR SYSTEM

• Operating Range: Max air inlet pressure of 100 psi (7 bar).

• Requirements: Requires bleed-type master air valve and recommended air filter; exhaust must remain unrestricted.

APPLICATIONS & SAFETY

• Uses: Chemical/solvent transfer, water treatment, paints, coatings, adhesives, and general fluid transfer.

• Safety: ATEX-certified models available (Acetal); non-conductive models (Poly/PVDF) must be grounded when pumping flammable fluids.

TECHNICAL DATA

• Max Press/Flow: 100 psi (7 bar) | 5 GPM (19 LPM).

• Max Solids: 1.5 mm (0.06 in).

• Service Specs: Covers require 42–47 in-lb torque; air valve and fluid kits are field-replaceable.

HUSKY 2150 SERIES

OVERVIEW & FEATURES

• Dual Drive: Available in pneumatic (stall‑free, low‑pulsation) or electric (up to 80% energy savings).

• Longevity: Up to 5× longer diaphragm life via overmolded designs; seal‑less architecture prevents mechanical failure.

• Versatility: Self‑priming and run‑dry capable; handles slurries, abrasives, and shear‑sensitive fluids.

• Performance: Delivers up to 150 gpm (568 l/min) and 120 psi (8 bar) with smooth, consistent flow.

• Serviceability: Externally accessible air valve and simplified parts count for rapid maintenance.

• Construction: Lube‑free operation with epoxy‑coated air sections; ANSI‑compatible 2‑inch porting for drop‑in replacement.

FLUID PORTS

• 2 in ANSI end‑porting; 2 in npt(f) or bsp (Aluminum, SST, Ductile Iron).

• 2 in ANSI/DIN/JIS flange (Polypropylene, Conductive Poly, PVDF, SST).

MATERIALS

• Fluid Section: Aluminum, Stainless steel, Ductile iron, Polypropylene, Conductive polypropylene, PVDF.

• Wetted Parts (Seats/Balls/Diaphragms):

• Seats: Polypropylene, PVDF, Santoprene, 316 stainless steel, TPE, Geolast.

• Balls: Acetal, Polypropylene weighted, Santoprene, Geolast, 440C stainless steel, TPE.

• Diaphragms: PTFE, PTFE/EPDM overmolded, PTFE/Neoprene two‑piece, Santoprene, TPE, Geolast.

DRIVE SYSTEMS

• Pneumatic: Stall‑free, low‑pulsation air valve; lube‑free; 20–120 psi range; externally accessible valve.

• Electric: AC induction motor (3‑phase 230V/460V); gearbox for variable speeds; stall‑under‑pressure; IE3 efficiency, IP55 enclosure; supports continuous duty.

APPLICATIONS

• Chemical/solvent transfer; abrasive slurries; wastewater and industrial effluent; shear‑sensitive materials; high‑flow transfer; energy‑sensitive operations.

TECHNICAL DATA

• Max Press/Flow: 120 psi (0.8 MPa, 8 bar) | 150 gpm (568 l/min).

• Speed/Volume: 145 cpm | 1.03 gal (3.90 L) per cycle.

• Suction/Solids: 18 ft (5.48 m) lift wet/dry | 1/4 in (6.3 mm) max solids.

• Inlets: 1/2 in npt(f) air (pneumatic) | 3/8 in compressor (electric).

• Noise/Motor: 85–90 dBa | 5–7.5 HP, 4‑pole, 1800/1500 rpm; Gear ratios: 11.25 / 16.46 / low‑speed.

HUSKY 2150LP SERIES

OVERVIEW & FEATURES

• Large Particle Handling: Specialized 2-inch AODD pump featuring large-particle flapper checks designed to pass solids up to nearly 2 inches (46 mm).

• Rugged Durability: Powder-coated aluminum wetted section built for continuous duty in harsh, corrosive environments like mines, sumps, and industrial waste sites.

• High Performance: Delivers high-flow delivery up to 150 gpm (568 lpm) with a fluid pressure capability of 120 psi.

• Anti-Clogging: Engineered to move "anything and everything," including waste, trash, slurries, and abrasive fluids with minimal clogging.

• Rapid Service: Features an external air valve that can be replaced in minutes to minimize downtime during maintenance.

• Extreme Suction: Capable of impressive suction lifts up to 20 ft (6.1 m) dry and 30 ft (9.14 m) wet.

FLUID PORTS

• Air Ports: 1/2 in npt(f) inlet; 3/4 in npt(f) exhaust.

• Fluid Inlet/Outlet: 2 in npt(f) or 2 in bspt(f) aluminum manifolds.

MATERIALS

• Wetted Section & Drive: Powder-coated Aluminum wetted section; Aluminum center section and air valve.

• Wetted Parts (Seats, Checks & Diaphragms):

  • Seats: 303 stainless steel with Buna-N seals.

  • Checks (Flappers): Buna-N overmolded 303 stainless steel flapper.

  • Diaphragms: Buna-N, Polychloroprene, Geolast, TPE, or Santoprene®.

  • Gaskets: Buna-N.

AIR SYSTEM & INSTALLATION

• Operation: Pneumatic drive operating between 20–120 psi with high air consumption capacity for heavy solid throughput.

• Maintenance: External air valve and flapper checks simplify service and reduce clogging risks in dirty or abrasive environments.

• Footprint: Standard AODD mounting footprint for easy installation and replacement in existing systems.

APPLICATIONS

• Wastewater and trash transfer, mines/sumps, industrial slurries, abrasive cleanup, and high-solids process streams.

TECHNICAL DATA

• Max Press/Flow: 120 psi (8.27 bar) | 150 gpm (568 lpm).

• Max Solids: 1.8 in (46 mm).

• Speed/Volume: 145 cpm | 1 gallon (3.79 L) per cycle.

• Consumption: 175 scfm max; 60 scfm @ 70 psi / 60 gpm.

• Noise Level: 90 dBa @ 100 psi, 50 cpm.

HUSKY 2200 SERIES

OVERVIEW & FEATURES

• Top-Tier Performance: 2-inch AODD pump delivering the highest fluid flow rate in its class—up to 200 gpm (757 lpm)—in a compact, portable size.

• High Efficiency: Up to 40% more efficient than comparable pumps, featuring a high-efficiency air system and a fluid pressure rating of 125 psi (8.6 bar).

• Leak-Free Reliability: Reinforced frame design eliminates fluid leakage and improves overall structural durability.

• Modular Air Valve: Patented modular air valve is online-serviceable and designed for smooth, consistent cycling without the need for lubrication.

• Chemical Integrity: Single-piece polypropylene center section ensures superior reliability and broad chemical compatibility.

• Longevity: Overmolded diaphragm option available for up to 5× longer life compared to standard designs.

FLUID PORTS

• Air Ports: 3/4 in npt(f) inlet; 1 in npt(f) exhaust.

• Fluid Inlet/Outlet: 2 in (50 mm) ANSI/DIN flange (center- and end-porting options available).

MATERIALS

• Fluid Section: Polypropylene or PVDF.

• Center Section & Air Valve: Polypropylene.

• Wetted Parts (Seats/Balls/Diaphragms):

• Seats: Polypropylene, PVDF, Santoprene®, or Stainless steel.

• Balls: FKM, PTFE, Santoprene®, or Stainless steel.

• Diaphragms: FKM, PTFE/EPDM overmolded, PTFE/Santoprene two-piece, or Santoprene®.

• Seals: PTFE, Santoprene®, or PTFE/EPDM overmolded.

• Compliance: All materials are FDA-compliant per CFR Title 21, Section 177.

AIR SYSTEM & INSTALLATION

• Operation: Pneumatic drive (20–125 psi) with a lube-free design that simplifies air supply setup.

• Serviceability: Quick-access air valve and diaphragms; standard AODD mounting footprint for easy drop-in replacement.

• Structural Design: Reinforced frame and seal-less architecture reduce alignment sensitivity and prevent leaks.

APPLICATIONS

• Chemical transfer, industrial fluids, wastewater/slurries, abrasive or solids-bearing materials, and high-flow portable transfer in harsh environments.

TECHNICAL DATA

• Max Press/Flow: 125 psi (8.6 bar) | 200 gpm (757 lpm).

• Suction/Solids: 31 ft (9.4 m) wet lift / 16 ft (4.9 m) dry lift | 3/8 in (9.5 mm) max solids.

• Consumption: 70–75 scfm @ 70 psi/100 gpm; 140–157 scfm max.

• Volume per Cycle: 1.3–1.6 gal (4.9–6.1 L).

• Noise Level: 87.3 dBa @ 70 psi; 94.7 dBa @ 100 psi.

HUSKY 307 SERIES

OVERVIEW & FEATURES

• Compact Efficiency: 3/8-in end-porting AODD pump designed for OEM skids, compact systems, and multi-fluid transfer.

• Low-Pressure Operation: Operates on as little as 20 psi (1.4 bar) with a stall-free, low-pulsation air valve for smooth changeover.

• Flexible Manifold: Split-manifold option available for pumping multiple fluids simultaneously without mixing.

• Reliable Design: Self-priming, runs dry without damage, stalls under pressure, and is factory-tested before shipping.

• Maintenance: Lube-free air valve system featuring easy external serviceability and rapid assembly/disassembly.

• Versatility: Supports stand-mount, pail-mount, wall-mount, and general transfer installations.

FLUID PORTS & CONNECTIONS

• Inlet/Outlet: 3/8 npt(f) or 3/8 BSPT (re-orientable ports); flexible hoses required for connection.

• Air Ports: 1/4 npt(f) air inlet; 3/8 npt(f) air exhaust (supports remote exhaust line with 3/8 in. min ID).

• Recommendations: Fluid pressure relief valve and air filter recommended; exhaust must remain unrestricted.

MATERIALS & WETTED PARTS

• Fluid Section: Acetal (conductive/groundable) or Polypropylene.

• Air Motor: Polypropylene (protect from prolonged UV exposure).

• Wetted Parts (Seats/Balls/Diaphragms):

• Seats: Acetal, 316 stainless steel.

• Balls: PTFE, TPE, Santoprene, Buna‑N.

• Diaphragms: PTFE, TPE, Santoprene, Buna‑N.

APPLICATIONS & SAFETY

• Uses: Chemical/solvent transfer, water treatment, paints, coatings, adhesives, and process fluids.

• Grounding: Acetal models include a grounding strip; Polypropylene models are non-conductive and must not be used with non-conductive flammable fluids.

• ATEX: Only Acetal fluid-section models are ATEX-approved (Ex II 2 GD).

TECHNICAL DATA

• Max Press/Flow: 100 psi (7 bar) | 6.5 GPM (24.6 LPM).

• Max Solids: 1.6 mm (1/16 in.).

• Service Specs: Manifold torque: 50–60 in‑lb (5.6–6.8 N·m).

• Repairability: Field-replaceable diaphragms and ball checks; full repair kits available for all internal sections.

HUSKY 3300 SERIES

OVERVIEW & FEATURES

• Dual Drive Performance: 3-inch pump platform available in pneumatic (stall-free, low-pulsation) or electric (up to 80% energy savings) configurations.

• Class-Leading Flow: Highest flow rate in its class, delivering up to 300 gpm (pneumatic) or 220 gpm (electric).

• Extended Life: Overmolded diaphragm designs offer up to 5× longer life; seal-less architecture eliminates mechanical seal failures.

• Versatile Handling: Self-priming and run-dry capable; safely transfers slurries, abrasives, and shear-sensitive materials with solids up to 1/2 inch.

• Control & Safety: Electric models are VFD-compatible for metering/process control with near-zero noise pollution; ATEX configurations available.

• Rugged Construction: Heavy-duty build with a one-piece center section to reduce leak points; ANSI-compatible porting for drop-in replacement.

FLUID PORTS

• 3 in ANSI/DIN flange (Polypropylene).

• 3 in npt(f) or 3 in bspt (Aluminum, Stainless Steel).

MATERIALS

• Fluid Section: Aluminum, Stainless Steel, Polypropylene.

• Wetted Parts (Seats/Balls/Diaphragms):

• Seats: Acetal, Buna-N, FKM, Geolast, Polypropylene, Santoprene, PTFE, TPE, Stainless Steel.

• Balls: Acetal, Polychloroprene, Polypropylene, Santoprene, Geolast, PTFE, TPE, Stainless Steel.

• Diaphragms: Buna-N, Polychloroprene (std/overmolded), FKM, Geolast, PTFE, PTFE/EPDM overmolded, PTFE/Santoprene 2-piece, Santoprene, TPE.

• Manifold O-Rings: Buna-N, PTFE, FKM, Geolast, Santoprene, TPE.

DRIVE SYSTEMS

• Pneumatic: Stall-free air valve; lube-free operation; 20–125 psi range (material-dependent).

• Electric: High-efficiency AC induction motor (7.5 HP); stall-under-pressure capability; 3-phase 230V/460V; IP55/IP56 rating.

APPLICATIONS

• Chemical/solvent transfer, oil & gas, mine dewatering, abrasive slurries, paints/coatings, and high-flow industrial wastewater.

TECHNICAL DATA

• Max Fluid Pressure: 125 psi (Metal/Alum center) | 100 psi (Poly or Poly center).

• Max Flow: 300 gpm (Pneumatic) | 220 gpm (Electric).

• Suction/Solids: 31 ft wet (16 ft dry) lift | 1/2 in (13 mm) max solids.

• Displacement: 2.9 gal (Standard) | 2.0 gal (Overmolded) per cycle.

• Operating Range: 20–125 psi (Alum center) | 20–100 psi (Poly center).

• Air Consumption: 275–335 scfm max | Noise: Near-zero noise on electric drive.

HUSKY 515 SERIES

OVERVIEW & FEATURES

• Reliable Design: Features a bolt‑through fluid cover for leak‑free operation and a seal‑less AODD design with no mechanical seals.

• Low-Pressure Start: Operates on as little as 20 psi (1.4 bar) with a stall‑free, low‑pulsation air valve for smooth changeover.

• Flexible Layout: Available in center‑porting and end‑porting configurations; includes a split‑manifold option to pump multiple fluids without mixing.

• Operational Safety: Self‑priming, runs dry without damage, stalls under pressure, and is factory‑tested prior to shipping.

• Maintenance: Lube‑free air system with an easy‑to‑service air valve and ball checks; manifolds are re‑orientable for various installations.

FLUID PORTS & CONNECTIONS

• Fluid Inlet/Outlet: 1/2 in. and 3/4 in. npt(f) or bspt(f).

• Air Ports: 1/4 npt(f) air inlet; 3/8 npt(f) air exhaust (supports remote pilot operation).

• Requirements: Requires bleed‑type master air valve; air filter recommended; exhaust must remain unrestricted.

MATERIALS & WETTED PARTS

• Fluid Section: Acetal (conductive), Polypropylene, or PVDF.

• Air Motor: Polypropylene (requires protection from prolonged UV exposure).

• Wetted Parts (Seats/Balls/Diaphragms):

• Seats: Acetal, Polypropylene, PVDF.

• Balls: PTFE, Santoprene, Buna‑N, TPE, Stainless Steel.

• Diaphragms: PTFE, Santoprene, Buna‑N, TPE.

APPLICATIONS & SAFETY

• Uses: Chemical/solvent transfer, water treatment, multi-fluid systems, paints, coatings, adhesives, and OEM skids.

• Mounting: Supports stand‑mount, pail‑mount, wall‑mount, and transfer installations.

• Grounding: Acetal models are conductive and include a grounding screw; Polypropylene and PVDF models are non‑conductive.

• ATEX: Only specifically marked Acetal 515 models are ATEX‑approved (Ex II 2 GD).

TECHNICAL DATA

• Max Press/Flow: 100 psi (7 bar) | 15 gpm (56.7 lpm).

• Max Air Inlet: 100 psi (7 bar).

• Service Specs: Manifold torque: 80–90 in‑lb (9–10 N·m).

• Repairability: Ball checks, diaphragms, and air valves are field‑replaceable; full repair kits available for all sections.

HUSKY 716 SERIES

OVERVIEW & FEATURES

• Medium-Flow Transfer: 3/4-inch AODD pump designed for industrial transfer and OEM systems requiring robust sealing.

• Leak-Free Reliability: Bolt-through fluid covers provide high-integrity sealing; seal-less design eliminates mechanical seal failures.

• Smooth Operation: Stall-free, low-pulsation air valve ensures rapid changeover; operates on low air pressure and is factory-tested.

• Configuration Options: Available in center-porting and end-porting; quiet operation with optional remote muffler support.

• Resilient Performance: Self-priming, runs dry without damage, stalls under pressure, and features a lube-free air system.

FLUID PORTS & CONNECTIONS

• Fluid Inlet/Outlet: 3/4 npt(f), bspt(f), or bspp(f).

• Air Ports: 1/4 npt(f) air inlet; 3/8 npt(f) air exhaust.

• Versatility: Re-orientable manifolds support diverse mounting requirements in industrial systems.

MATERIALS & WETTED PARTS

• Metal Pump Options: * Aluminum: Aluminum, stainless steel, PTFE, zinc-plated steel.

• Stainless Steel: 316 stainless steel, PTFE.

• Non-Wetted External Parts: Polypropylene, Stainless steel, Polyester (labels), Nickel-plated brass, and Epoxy-coated steel (feet).

APPLICATIONS & TEMPERATURES

• Uses: Chemical/solvent transfer, water treatment, coatings, adhesives, and inks. Ideal for systems requiring higher temperature limits.

• Operating Ranges:

• Acetal: 32°–180°F (0°–82°C)

• Polypropylene: 32°–175°F (0°–79°C)

• PVDF: 32°–200°F (0°–93°C)

• Metal (Alum/SST): 32°–225°F (0°–107°C)

TECHNICAL DATA

• Max Press/Flow: 100 psi (7 bar) | 16 gpm (61 L/min).

• Speed/Volume: 400 cpm | 0.04 gal (0.15 L) per cycle.

• Suction/Solids: 15 ft dry (25 ft wet) lift | 3/32 in (2.5 mm) max solids.

• Pressure Range: 30–100 psi (2.1–7 bar) air operating range.

• Serviceability: Features an easy-to-service air valve and field-replaceable ball checks.

Graco PARTS KITS & ACCESSORIES

SERIES OVERVIEW

• Centralized technical resource for OEM-matched installation, maintenance, and system-protection hardware.
• Engineered to support a wide array of pump architectures including Air-Operated Double Diaphragm (AODD), piston, and specialized metering pumps.
• Comprehensive selection of kits for fluid transfer, chemical supply, and waste evacuation.
• Standardized connectivity solutions for professional automotive service, gas station maintenance, and industrial environments.

CORE MAINTENANCE CATEGORIES

• Air Motor & Drive Section: Specialized Rebuild, Rebuild, and Service kits for center sections, air valves, and pilot valve assemblies to ensure consistent pneumatic cycling.
• Wet-End Repair Solutions: Comprehensive Seat, Ball, and Diaphragm kits, including advanced Duckbill and Flapper valve configurations for specialized fluid handling.
• Advanced Diaphragm & Plate Kits: Specialized HD Overmolded PTFE/EPDM repair kits and air/fluid plate sets for extended service life.
• Fluid Path Integrity: Dedicated Manifold kits (Inlet, Outlet, and Center), gasket sets, and shaft seal repair kits for leak-free operation.

SYSTEM PROTECTION & MOUNTING

• Protection Hardware: High-performance surge suppressors, thermal relief kits, and pressure relief valves to safeguard against hydraulic shock and pressure spikes.
• Installation & Mounting: Application-specific wall bracket kits, floor stands, and riser tube kits for immediate site deployment.
• Connectivity & Transfer: Pre-configured Transfer, Supply, and Flush kits designed for rapid material changes and system maintenance.

KEY FEATURES

• Configurable Repair Logic: Repair kits utilizing a matrix system to perfectly match specific material requirements such as 316 SST, Polypropylene, or PVDF.
• Pulsation Management: Surge suppressors engineered to control fluctuations and prevent cavitation in high-flow systems.
• Atmospheric Protection: Desiccant dryer integration to safeguard moisture-sensitive chemicals during storage or supply.
• Standardized Safety: Integrated grounding hardware and safety labels to meet industrial operational codes.

QUANTM Hygienic 3A Series

SERIES OVERVIEW

• Energy Savings: Consumes up to 80% less energy than AODD pumps & 50% less than competitive electric technologies.
• 3A Certified: Meets strict 3A certification standards for safe handling of food & dairy products.
• High Torque: Xtreme Torque (XT) motor technology delivers 8X more torque at low speeds than standard electric pumps.
• Rapid ROI: Operational efficiency often results in a full return on investment in under 12 months.
• Sanitary Finish: Wetted sections feature a 32 Ra micro-inch surface finish to prevent bacterial growth.
• Unique Stall Feature: The only electric diaphragm pump that stalls under pressure, preventing failures from line clogs without external sensors.
• Quiet Workspace: Muffler-free design provides a 90% decrease in sound intensity compared to air-driven models.

KEY FEATURES

• Overmolded Diaphragms: PTFE fluid-side plates eliminate crevices that can harbor bacteria.
• Plug-and-Play: Supports 120V, 240V, and 480V installations within existing AODD footprints.
• Hands-Free Automation: Built-in I/O port for seamless integration with plant PLC management.
• Xtreme Torque Technology: Operates at lower RPM to increase power density while minimizing resistance losses.
• Seal-less Architecture: Prevents leaks and allows for safe dry-run operation.
• CIP Applications: Designed with tri-clamp or DIN connections for rapid Clean-In-Place procedures.

FLUID PORTS

• Port Sizes: 1.0 in, 1.5 in, or 2.0 in configurations.
• Standard Connections: Sanitary tri-clamp or RD52 x 1/6 DIN options.

MATERIALS

• Fluid Section: 3-A Hygienic Stainless Steel with 32 micro finish.
• Diaphragms: PTFE/EPDM overmolded, PTFE/Santoprene two-piece, or EPDM overmolded.
• Check Valves: FDA-compliant ball or flapper options available in various elastomers.

APPLICATIONS

• Dairy Processing: Transfer of milk, yogurt, and cottage cheese.
• Ice Cream Production: Handling of ice cream ingredients and flavorings.
• Sanitary Food Handling: High-care transfer of shear-sensitive dairy and food ingredients.

TECHNICAL DATA

• Max Pressure: Up to 100 psi (6.89 bar).
• Max Flow Rate: Up to 120 gpm (454 lpm).
• Max Solids: Up to 0.5 in. (12.7 mm) depending on model.
• Wash-down Rating: IP66 for high-care sanitation environments.

QUANTM Hygienic Food Grade Series

SERIES OVERVIEW

• Energy Savings: Consumes up to 80% less energy than AODD pumps, typically paying for itself in under 12 months.
• Superior Torque: Powerful XT motor and drive delivers 8X more torque at low speeds compared to standard electric pumps.
• Sanitary Finish: 125 Ra fluid section finish designed for general food, beverage, and personal care transfer.
• Viscosity Handling: Efficiently transfers materials up to 25,000 cps depending on system configuration.
• Smooth Operation: Delivers a steady, smooth flow ideal for in-process and filling applications.
• Quiet & Clean: Muffler-free design eliminates air exhaust noise & prevents icing.
• Advanced Stalling: The only electric diaphragm pump that stalls under pressure to prevent failures from line clogs.

KEY FEATURES

• Overmolded Diaphragms: PTFE fluid side and EPDM air side plates eliminate crevices that harbor bacteria.
• Plug-and-Play: Supports 120V, 240V, and 480V installations without additional equipment investment.
• Remote Management: Integrated I/O port allows hands-free management via plant PLC.
• Rugged Design: Seal-less construction enables safe dry-run operation and eliminates leaks.
• Wash-down Rated: IP66 rated controls with FEP-compliant coating for harsh sanitation environments.

MATERIALS & PORTS

• Wetted Section: Cast 316 Stainless Steel with 125 micro-inch Ra finish.
• Elastomers: FDA-compliant Buna-N, EPDM, FKM, PTFE, or Santoprene.
• Port Sizes: 1.0 in., 1.5 in., or 2.0 in. configurations.
• Connections: Sanitary tri-clamp or DIN 11851.

TECHNICAL DATA

• Max Pressure: 100 psi (h30/h80) or 60 psi (h120).
• Max Flow Rate: 30 gpm to 120 gpm depending on model.
• Max Solids: 1/8 in. to 1/4 in. (3.2 mm to 6.3 mm).
• Suction Lift: Up to 29.0 ft (8.8 m) wet.

QUANTM Hygienic High Sanitation (HS) Series

SERIES OVERVIEW

• Energy Efficiency: Consumes up to 80% less energy than AODD pumps and 50% less than competitive electric technologies.
• Rapid ROI: High-efficiency design typically pays for itself in under 12 months through energy savings & rebates.
• High-Torque XT Motor: Delivers 8X more torque at low speeds compared to standard electric pumps.
• Superior Sanitation: 316L Stainless Steel wetted sections with a 32 Ra micro-inch finish for high-care transfer.
• Quiet Workspace: Muffler-free operation provides a 90% decrease in sound intensity versus air-driven models.
• Integrated Stall Feature: The only electric diaphragm pump that stalls under pressure without requiring external sensors.
• Sealless Design: Eliminates mechanical seal leaks allowing the pump to run dry

KEY FEATURES

• Overmolded Diaphragms: PTFE fluid-side plates eliminate bacterial crevices.
• Quick Knockdown: Tri-clamp or DIN connections for rapid cleaning & CIP applications.
• Automation-Ready: Standard I/O port allows hands-free management via plant PLC systems.
• Plug-and-Play: Supports 120V, 240V, and 480V for standard AODD footprints.
• Auto-Prime Feature: Intelligent control dial manages startup cycles to ensure consistent ingredient flow.

FLUID PORTS

• Port Sizes: 1.0 in, 1.5 in, or 2.0 in configurations depending on the model.
• Standard Connections: Sanitary tri-clamp or RD52 x 1/6 DIN options.

MATERIALS

• Fluid Section: 316L Stainless Steel with 32 Ra micro-inch finish.
• Check Valves: Ball or flapper options in various FDA-compliant elastomers.
• Diaphragms: PTFE/EPDM overmolded, PTFE/Santoprene two-piece, or EPDM overmolded.

APPLICATIONS

• Dairy & Ingredients: Safe transfer of yogurt, cottage cheese, and ice cream ingredients.
• High-Volume Beverage: Transfer for wineries, breweries, and distilleries.
• Personal Care: Sanitary handling of medical creams, cosmetics, and toothpaste.
• Pharma & Bio: Clean transfer of vaccines, plasma, and pharmaceutical solvents.

TECHNICAL DATA

• Max Pressure: 100 psi (6.89 bar) or 60 psi (4.1 bar) for h120 models.
• Max Flow Rate: Up to 120 gpm (454 lpm).
• Max Solids: 0.42 in. to 2.46 in. depending on ball or flapper check design.
• Wash-down Rating: IP66 for rigorous sanitation environments.

QUANTM Hygienic Large Particle (LP) Series
SERIES OVERVIEW
Operational Efficiency: Reduces energy consumption by      up to 80% compared to AODD pumps and eliminates the requirement for      compressed air. 
High-Torque XT Drive: Powerful motor technology      delivers the rugged benefits of an AODD—such as stalling under pressure      and self-priming—with electric drive efficiency. 
Sustainability Steward: Revolutionary motor design      allows facilities to improve productivity while complying with evolving      environmental regulations. 
Sanitary Construction: Features 316L Stainless Steel      wetted sections with a 32 Ra surface finish specifically for hygienic      applications. 
Muffler-Free Workspace: Eliminating compressed air      drives a 23% reduction in sound pressure and a 90% decrease in sound      intensity. 
Reliable Design: Gearbox-free architecture reduces the overall      footprint and simplifies maintenance compared to other electric options. 
KEY FEATURES
Solids Handling: Specifically built to transfer large particles      up to 3.8 inches in diameter without product damage. 
Remote Automation: Integrated I/O port enables      remote or PLC control to start/stop the pump and adjust operating speed. 
CIP/COP Compatibility: Sealless architecture and quick      knockdown tri-clamp connections support fast Clean-In-Place or      Clean-Out-of-Place procedures. 
Self-Priming Capability: Electric-operated pumps can      pull a suction without being gravity-fed or requiring another supply      source. 
Safe Dry-Run: Durable sealless design eliminates leaking and      mechanical failures caused by rigorous run-dry conditions. 
FLUID PORTS
Sizes: Available in configurations ranging from 1.5 inch up to 4.0 inch      port sizes. 
Standard Connections: Equipped with sanitary      tri-clamp or DIN 11851 connections to ensure easy cleanability. 
MATERIALS
Fluid Section: Constructed from Cast 316 Stainless Steel with a      32 Ra hygienic finish. 
Certifications: All wetted materials are FDA-compliant for safe      food and dairy handling. 
Checks/Diaphragms: Options include EPDM Overmold,      PTFE/EPDM Overmold, and Santoprene to eliminate crevices that harbor      bacteria. 
APPLICATIONS
Large Ingredient Transfer: Efficiently handles boiled      eggs, meat, poultry, fruits, and vegetables without product degradation. 
Meat & Poultry Processing: Transfer of sensitive materials      including poultry viscera, chicken nuggets, and blood slurry. 
Shear Sensitive Fluids: Gentle transfer of medium to      high viscosity materials that typically damage rotary-style pumps. 
TECHNICAL DATA
Max Pressure: 100 psi (7 bar) for h80 models or 60 psi (4 bar)      for h120 models. 
Max Flow Rate: Delivering up to 130 gpm (492 lpm) depending on      series size and pump model. 
Max Solids: Engineered to pass solids ranging from 1.2      inches to 3.8 inches in diameter. 
Wash-down Rating: IP66 rated for use in rigorous sanitation zones      and high-care environments.

QUANTM Hygienic Pharmaceutical Grade Series

SERIES OVERVIEW

• Operational Efficiency: Reduces energy consumption by up to 80% compared to AODD and 50% compared to other electric pumps.
• High-Torque XT Drive: Powerful motor delivers 8X more torque at low speeds than standard electric drives.
• Rapid Investment Return: Energy savings and utility rebates often result in a return on investment in under 12 months.
• Ultra-Sanitary Finish: Features a 316 Stainless Steel wetted section with a 20 Ra micro-inch surface finish.
• Reliable Stall Feature: The only electric pump designed to stall under pressure, protecting the motor and lines without external sensors.
• Muffler-Free Workspace: Muffler-free operation provides a 90% decrease in sound intensity and prevents air-valve icing.

KEY FEATURES

• Bacteria Resistance: Overmolded diaphragm plates (PTFE fluid side/EPDM air side) eliminate crevices that harbor bacteria.
• Remote Automation: Integrated I/O port enables hands-free management via plant PLC for speed and status monitoring.
• CIP Compatibility: Quick-knockdown fluid connections and sealless design are specifically engineered for CIP applications.
• Drop-In Replacement: Compact footprint fits seamlessly into existing air-operated pump installations.
• Safe Dry-Run: Sealless architecture allows the pump to run dry without damage or mechanical seal failure.

FLUID PORTS

• Sizes: Available in 1.0 in, 1.5 in, or 2.0 in port configurations.
• Standard Connections: Sanitary tri-clamp or RD52 x 1/6 DIN options for pharmaceutical compliance.

MATERIALS

• Fluid Section: 316 Stainless Steel with 20 Ra pharmaceutical-grade finish.
• Certifications: Wetted materials are FDA-compliant and USP Class VI classified.
• Checks/Diaphragms: Options include PTFE, EPDM Overmold, and Santoprene.

APPLICATIONS

• Biopharmaceuticals: Handling of vaccines, plasma, and blood products.
• Medical Transfer: Efficient transfer of medical creams and personal care lotions.
• Solvent Delivery: Pharmaceutical-grade chemical and solvent transfer in high-care environments.

TECHNICAL DATA

• Max Pressure: 100 psi (6.89 bar) or 60 psi (4.1 bar) for h120 models.
• Max Flow Rate: 30 gpm to 120 gpm depending on series size.
• Max Solids: 0.42 in. to 0.5 in. depending on model.
• Wash-down Rating: IP66 for use in rigorous cleaning and sanitation zones.

QUANTM INDUSTRIAL i120 SERIES

SERIES OVERVIEW

• 2-inch (50.8 mm) electric-operated double diaphragm pump.
• 80% reduction in energy consumption versus pneumatic alternatives.
• Direct-drive FluxCore motor removes the need for gearboxes.
• 90% decrease in sound intensity through muffler-free operation.
• Integrated control knob for manual flow and pressure management.
• IP66 wash-down rating for durability in industrial environments.

KEY FEATURES

• Stalls under pressure and handles safe dry-run operation.
• Onboard I/O port for remote PLC control and monitoring.
• Drop-in replacement footprint for standard 2-inch AODD pumps.
• No system icing or freezing issues common to air-driven systems.
• Direct-drive design with fewer moving parts for simplified maintenance.

FLUID PORTS

• Fluid inlet/outlet: 2 in. npt(f) or 2 in. bspt.
• Flange options: DIN PN16, ANSI 150, or JIS 10K (select models).

MATERIALS

• Fluid Section: Aluminum, Cast Iron, Polypropylene, PVDF, or Stainless Steel.
• Seats: Acetal, Buna-N, Stainless Steel, Polypropylene, PVDF, or Santoprene.
• Balls: Acetal, Buna-N, Polychloroprene, PTFE, Santoprene, or 440C SST.
• Diaphragms: Buna-N, Polychloroprene, PTFE/EPDM Overmold, or Santoprene.

APPLICATIONS

• High-volume chemical transfer and bulk unloading.
• Abrasive or solids-bearing industrial fluid handling.
• Industrial wastewater treatment and heavy slurry transfer.
• Paint and solvent delivery in large-scale manufacturing.
• Hazardous locations requiring ATEX/Ex certified equipment.

TECHNICAL DATA

• Max fluid pressure: 60 psi (4.1 bar, 0.41 MPa).
• Max flow rate: 120 gpm (454 lpm).
• Max suction lift: Wet 29.0 ft (8.8 m), Dry 15.9 ft (4.8 m).
• Max pumpable solids: 0.25 in (6.35 mm).
• Electrical: 240V single-phase or 480V three-phase options

QUANTM INDUSTRIAL i120LP SERIES

SERIES OVERVIEW

• 2-inch (50.8 mm) electric double diaphragm pump for large particles.
• 80% energy savings compared to air-operated double diaphragm pumps.
• Flapper check valve design for handling large solids without damage.
• 90% decrease in noise compared to standard air-driven pumps.
• FluxCore motor technology for direct-drive without a gearbox.
• IP66 wash-down rated for reliable service in harsh environments.

KEY FEATURES

• Gentle material transfer suitable for shear-sensitive fluids.
• Stalls under pressure to prevent pump failure from line clogs.
• Sealless design allows for indefinite dry-run capability.
• Remote PLC integration via built-in I/O connection port.
• No icing issues common to air-driven installations.

FLUID PORTS

• Fluid inlet/outlet: 2 in. npt(f) or 2 in. bspt.

MATERIALS

• Fluid Section: Aluminum.
• Seats: Stainless Steel with Buna-N seals.
• Checks: Buna-N or Polychloroprene overmolded flappers.
• Diaphragms: Buna-N, Polychloroprene, or Santoprene.

APPLICATIONS

• Heavy industrial slurries and solids-bearing waste.
• Shear-sensitive chemical transfer and processing.
• Abrasive fluid handling with large particle requirements.
• Bulk material unloading in remote or off-grid sites.

TECHNICAL DATA

• Max fluid pressure: 60 psi (4.1 bar, 0.41 MPa).
• Max flow rate: 120 gpm (454 lpm).
• Max pumpable solids: 1.8 in (46 mm).
• Max suction lift: Wet 29.0 ft (8.8 m), Dry 15.9 ft (4.8 m).
• Electrical: 240V single-phase or 480V three-phase.

QUANTM INDUSTRIAL i30 SERIES

SERIES OVERVIEW

• 1-inch (25.4 mm) electric-operated double diaphragm pump.
• 80% less energy consumption than comparable AODD pumps.
• Direct-drive motor eliminates gearboxes and compressed air requirements.
• 90% reduction in sound intensity with muffler-free operation.
• Integrated control knob for manual flow and pressure adjustment.
• IP66 wash-down rated for protection in industrial environments.

KEY FEATURES

• Stalls under pressure and handles safe dry-run operation.
• I/O port included for remote PLC control and monitoring.
• Drop-in replacement matching standard 1-inch AODD footprints.
• No system icing or freezing issues common in pneumatic drives.
• Direct-drive design with fewer moving parts than traditional EODDs.

FLUID PORTS

• Port sizes: 1 in. NPT(f) or 1 in. BSPT.
• Flange options: DIN PN10, ANSI 150, or JIS 10K (select models).

MATERIALS

• Fluid Section: Aluminum, Cast Iron, PP, Conductive PP, PVDF, or SST.
• Seats: Acetal, AL, BN, FK, GE, PP, PV, 17-4PH, SP, or TPE.
• Balls: Acetal, BN, CR, FK, GE, PTFE, SP, 440C SST, or TPE.
• Diaphragms: BN, CO, FK, GE, PO, PS, SP, or TPE.

APPLICATIONS

• Industrial chemical transfer and drum unloading.
• Paint, ink, and solvent delivery.
• Industrial wastewater handling and slurries.
• Abrasive or solids-bearing fluid processing.
• Hazardous locations requiring ATEX/Ex certified equipment.

TECHNICAL DATA

• Max fluid pressure: 100 psi (6.89 bar, 0.69 MPa).
• Max flow rate: 30 gpm (114 lpm).
• Max suction lift: Wet 29.0 ft (8.8 m), Dry 7.9 ft (2.4 m).
• Max pumpable solids: 0.125 in (3.2 mm).

Electrical: Factory-wired 120V, 240V, or 480V options

QUANTM INDUSTRIAL i80 SERIES

SERIES OVERVIEW

• 1.5-inch (38.1 mm) electric-operated double diaphragm pump.
• 80% lower energy consumption than comparable AODD pumps.
• FluxCore motor technology eliminates gearboxes and compressed air needs.
• 90% reduction in sound intensity provides a quieter workspace.
• Integrated control dial manages flow and pressure at the pump.
• IP66 wash-down rated for protection in industrial environments.

KEY FEATURES

• Stalls under pressure and handles dry-run operation safely.
• Remote monitoring through an I/O port for PLC integration.
• Drop-in replacement footprint for existing 1.5-inch AODD pumps.
• No system icing issues common to air-driven installations.
• Direct-drive design with fewer moving parts than traditional EODDs.

FLUID PORTS

• Fluid inlet/outlet: 1.5 in. npt(f) or 1.5 in. bspt.
• Flange options: DIN PN10, ANSI 150 (available on plastic models).

MATERIALS

• Fluid Section: Aluminum, Polypropylene, PVDF, or 316 Stainless Steel.
• Seats: Aluminum, Buna-N, Stainless Steel, Polypropylene, PVDF, or Santoprene.
• Balls: Acetal, Buna-N, Polychloroprene, PTFE, Santoprene, or 440C SST.
• Diaphragms: Buna-N, Polychloroprene Overmold, PTFE/EPDM Overmold, or Santoprene.

APPLICATIONS

• High-flow chemical transfer and industrial processing.
• Abrasive or solids-bearing materials handling.
• Industrial wastewater treatment and slurry transfer.
• Paint and ink manufacturing and delivery.
• Hazardous locations requiring ATEX/Ex certified equipment.

TECHNICAL DATA

• Max fluid pressure: 100 psi (6.89 bar, 0.69 MPa).
• Max flow rate: 80 gpm (300 lpm).
• Max suction lift: Wet 29.0 ft (8.8 m), Dry 19.3 ft (5.9 m).
• Max pumpable solids: 0.19 in (4.8 mm).
• Electrical: 120V, 240V, or 480V factory-wired options