Myers

Myers Model 2C Two-Stage Centrifugal Pump - High performance 2C two-stage centrifugal pumps are designed to provide years of trouble-free service. The pump end quickly mounts to a NEMA 56C motor. Myers stream-flo design and dynamically balanced impellers produce quiet, vibration-free performance at all pressures. 2C pumps will prime up to 15 feet of total suction lift.

Myers Model 3MW Series 3" Solids Handling Wastewater Pump Series, Single-Seal, Vertical Discharge, 330 GPM The Heavy-Duty Myers 3MW Series Sewage Pumps Are Designed For Use In Residential Raw Sewage & Light Commercial Applications. 3MW Pumps Are Available In Single And Double Seal Configuration. The Enclosed Two Vane Impeller Provides High Efficiency Pumping And Easily Handles Trashy Solids Normally Found In Sewage Applications. The Series Is Offered With Vertical Discharge And Easily Adapts To A Quick-Disconnect Slide Rail System.

Myers 3RMW Series Submersible Wastewater Wortex Pumps - are the right choice when difficult to pump fibrous or stringy solids are to be expected. The 3RMW series provides smooth, vibration-free operation over the entire performance curve. Available in single seal or dual seal versions.

Myers Model 3WHV Series - 3" Solids Handling Wastewater Pump Series, Single-Seal, Horizontal Discharge, 400 GPM The 3WHV Series Solids-Handling Pumps are designed primarily for commercial applications such as: schools, churches, industrial plants, shopping centers, apartments and condominiums, marinas, interstate rest stops, sewage collection systems, campgrounds, motels, restaurants, office & commercial buildings, state & federal parks and treatment plants. This pump can be installed on legs or with a quick-disconnect slide rail system. Its ability to handle 2-1/2" spherical solids makes it ideal for most light to medium commercial installations.

Myers Model ALC-18 Piggyback Switches

Myers CE, CMEP & CMW Electrical Simplex and Duplex Control Panels - With A Wide Range Of Options: Elapsed time meter, Alarm bell or horn,Auxiliary contacts Condensation heater,Transfer switch / generator receptacle Intrinsically safe relays,Lightning arrestor Full inner door, Cycle counter 24V control circuitry, Convenience outlet Low level cut-off and alarm, Pump delay circuitry Phase loss circuitry, Low voltage , Circuitry Alarm Silencer

Myers Centri-Thrift Centrifugal Pump Series - designed for continuous service under demanding conditions. Centri-Thrift pumps have earned a reputation for reliability

Myers Centrifugal Pumps Repair Parts

Myers CMV-BP BasinPro™ 1/2 HP Packaged Sewage System,95 GPM - Is An Ideal Choice For New Construction Or Retrofit. Pre-Assembled, With 45-Gallon Basin, Residential Sewage Pump With E-Z Switch™ Liftout Rod And Float Switch.

Myers Model CMV1830 -1/2 HP Packaged Sewage Ejector System, 95 GPM. Complete Package For Versatile Applications Includes: CMV5A-11 Sewage Pump. Ideal For Residential Septic Tank, Sewage And Large Sumps.

Myers CMV5 Series (2" Solids) Sewage - 1/2 HP Thermoplastic Sewage Pump, 95 GPM. Ideal For Sewage, High-Capacity Sump, Effluent. Engineered For Many Years Of Maintenance-Free Operation. Durable Motor Will Deliver Many Years Of Reliable Service.

Myers Model CT Series Centrifugal Pumps - designed to meet your toughest pumping requirements. Rugged cast iron construction can be coupled with either a corrosion resistant composite, or a lead-free brass impeller. Versatile design features allow these pumps to be installed with either a vertical or horizontal discahrge. The CT Series is ideal for irrigation, air conditioning, cooling tower and booster applications.

Myers Model DE Series - 4/10 & 1/2 HP Stainless Steel Continuous-Duty Effluent Pump Series. Designed To Quickly Clear Water Or Effluent. Ideal For Residential And Commercial Applications.

Myers Model DS Series 1/3, 1/2 and 3/4 HP Stainless Steel Submersible Sump Pump Series - Used For Dewatering From Construction Sites, Ponds, Pits, Tanks And Extracting Water From Foundations Or Flooded Basements. The DS series pumps are designed for basement sumps, but are also ideal for dewatering duties in a variety of applications. This versatile pump features stainless steel construction for extreme resistance to corrosive environments and will provide years of superior service.

Myers Model DSW Series - 2" Solids Handling Stainless Steel Continuous-Duty Sewage Pump Series. Ideal For Domestic Wastewater And Septic Systems

Myers Model DU25 1/4 HP Stainless Steel Utility Pump, 19 GPM, Manual Switch - Used For Dewatering Shallow Flooded Areas Such As Basements, Window Wells, Rooftops, Ponds And Stock Tanks.

Myers Model ED33 Series - 1/3 HP Above-Floor Sink Pump System, Used For Laundry Trays, Wet Bars, Beautician Or Utility Sinks, Dehumidifier/Air-Conditioning Units

Myers Model EPP Series PENTEK® Elevator Pump Control System - approved for oil/water detection in applications where oil and hydrocarbons are prohibited from being released into the environment. The system is designed to provide pumping, monitoring and alarm in garages, elevator sump pits, transformer vaults and substations. The elevator pump control activates the pump for removal of water from elevator pits in accordance with ASME17.1. The control will also shut down the pump before discharging harmful substances.

Myers HJ & HR Series Convertible Jet Pumps. Extrmely reliable and dependable pumping for your sprinkler needs at home, farm and bussiness and industry needs. Many water system uses for these convertible jet pumps.

Myers Model I2C/I2CI Two Stage - are designed for high performance, continuous duty and long life. I2C Series pumps have been installed in booster, irrigation, water circulation, fluid transfer, boiler feed, car wash, water reclamation, water supply, golf course sprinkling and other general industrial, commercial and agricultural applications requiring the pumping of clear or non-corrosive liquids.

Myers Model MBSP 12 Volt Battery Standby Pump System, 30 GPM The Myers® MBSP battery operated back-up sump pump is designed to back up primary residential sump pumps in case of pump or power failure. A must for those installations where an inoperative sump pump can not be tolerated. Separate float switch and built-in alarm automatically starts back-up system and activates warning buzzer to protect against high water damage and warn of primary pump failure

Myers Model MBSP-2 (battery backup) and MBSP-2C (primary+backup combo) Myers CLASSIC Smart Battery Backup Systems - The Myers Smart Battery Backup Sump Pump System will help protect the basement from water damage by kicking into action during power outages or primary sump pump failures. Most home buyers don’t think about their sump pump, but when the consequences of unexpected pump failures are understood, the solution from Myers will assist them in making the right decision. The CLASSIC version is available in backup-only (MBSP-2) or a pre-plumbed primary+backup system (MBSP-2C). Both offer smart charging technology and dual battery capacity. In addition to the CLASSIC series, the PREMIUM series is available in backup-only (MBSP-3) or a pre-plumbed primary+backup system (MBSP-3C). Both offer remote monitoring through our Virutal Water Assistant, smart charging technology, and dual battery capacity.

Myers MBSP-3 / MBSP-3C Premium Battery Backup System - Model MBSP-3 (battery backup) and MBSP-3C (primary+backup combo)
Myers PREMIUM Smart Battery Backup Systems - The Myers Smart Battery Backup Sump Pump System will help protect the basement from water damage by kicking into action during power outages or primary sump pump failures. Most home buyers don’t think about their sump pump, but when the consequences of unexpected pump failures are understood, the solution from Myers will assist them in making the right decision.

The PREMIUM version is available in backup-only (MBSP-3) or a pre-plumbed primary+backup system (MBSP-3C). Both offer remote monitoring, smart charging technology, and dual battery capacity.

In addition to the PREMIUM series, the CLASSIC series is available as a financial savings option as the MBSP-2 and MBSP-2C models. The MBSP-2 is available with a reliable reed switch rated at up to 10,000,000 cycles for long life. The reliable reed switch design is compact and eliminates the possibility of interference with primary pump switch, unlike using a typical vertical float. The MBSP-2C is available with a reliable reed switch and comes standard as a pre-plumbed unit with check valves, a primary pump and secondary pump. The CLASSIC series is not available with Virtual Water Assistant®. Only the PREMIUM series comes standard with the Virtual Water Assistant®.

VIRUTAL WATER ASSISTANT® - This cloud-based technology continually monitors the backup system and sends text or email alerts if problems are detected.

Myers Pumps Model MCI033 / MCI050 Series 1/3 & 1/2 HP Submersible Cast Iron Sump Pump - The MCI033 and MCI050 series are rugged cast iron sump pumps featuring a vortex impeller that provides solids-handling capability up to 1/2". Applications include: Basement Sumps, Dewatering, Light Effluent and Water Transfer

Myers Model MCSP 1/3 HP Thermoplastic Pedestal Sump Pump, 50 GPM. The Myers MCSP series pedestal sump pumps are industry-proven for reliability and offer an economical choice for new installation or retrofit. Easy to install and an ideal solution for residential basement sump drainage. Available in engineered thermoplastic or cast iron models.

Myers Model MDC33 / MDC50 Series - 1/3 & 1/2 HP Cast Iron Submersible Sump Pump, Tethered or Vertical Switch. Pumping Applications: Basement Sumps, Dewatering, Light Effluent and Water Transfer. The MDC series cast iron
sump pumps are designed to operate in a variety of installations. A unique combination of corrosion resistant materials make these pumps a great choice for the extreme conditions. Pump intake screen, impeller, volute base, switch, and power cord are serviceable.

Myers Model ME Series - 1/2 through 1-1/2 HP Cast Iron Effluent Pump Series, 90 - 120 GPM. Ideal For Use In Mound And Trench Pressure Distribution Systems. Durable Motor Will Deliver Many Years Of Reliable Service. Single Seal and Double Seal Models Available for:ME50, ME75, ME100 and ME150

Myers Model ME3 Series - 1/3 HP Cast Iron Effluent Pumps, High-Head & High-Flow Models. Ideal For Effluent Removal, Sump Drainage, Water Transfer; Flood Control. Durable Motor Delivers Years Of Reliable Service. Engineered For Maintenance-Free Operation.

Myers ME4 Series Cast Iron Submersible Sump / Effluent Pumps are designed for home sumps. The unit is equipped with a 3-prong grounding-type power cord. The shaded-pole motor is oil filled and sealed for cooler running. Upper sleeve/lower ball bearing on the motor shaft never need lubrication. Automatic reset thermal protection. 1/2" Solids Handling spherical capability.

Myers Model ME40 Series - 4/10 HP Cast Iron Effluent & Drain Water Pump Series, 80 GPM. The Myers® ME40 series effluent pumps are one of the industry's most efficient models featuring a 4/10 HP motor. This powerful pump provides the flow and head required for demanding dosing systems and drainage applications. The ME40 incorporates cast iron, engineered thermoplastic and stainless steel in combination to produce a powerful and highly durable pump.

Myers Model ME40-CI Series 4/10 HP Submersible Cast Iron Solids Handling Pumps. A rugged series of submersible cast iron pumps with a non-clog, semi-open pellers and solids handling capability to 3/4".

Myers Model ME45 Series - 1/2 HP Cast Iron Effluent & Drain Water Pump, 87 GPM. The Myers® ME45 Series effluent pumps are designed to meet the demand of residential septic tanks or sump applications. This powerful 1/2 HP pump provides flow and head required for demanding dosing systems and drainage applications.

Myers ME7 Series Cast Iron Submersible Effluent Pumps are designed for sewage, effluent and waste water removal, sump drainage, liquid transfer systems, circulation, dewatering and flood control. 3/4" Solids Handling spherical capability.

Myers MEOSP Submersible Effluent Pumps are the perfect pump for Septic Tanks, Flood Control Units, Industrial Circulators, Elavator Pits and Basements Sump applications. Designed with specific residential demands. NPT discharge size is 1 1/2" with a powerful 1/2 HP (Horsepower) motor. Sleep easy knowing this rugged and durable cast iron effluent pump in in service at yoru residence. Also not this pump is capable of handling 5/8" spherical solids.

Myers MES 50/100 Sewage Ejector Effluent Pumps - Submersible High Head. Perfect pump for the following applications: Septic Tank Effluent, High Head Sump and Dewatering. This series comes in two horsepower options, MES50 at 1/2 hp and the MES100 features a 1 Hp. If your residential applications is in need of high head performance for septic tank effluent, this 2 inch series from Myers is designed for you. Capable of passing 3/4" spherical solids.

Myers Model MES106 Multi-Purpose Utility Pump with Puddle Attachment, Manual Switch - The ideal solution for automatically removing liquid condensation from air conditioning and heating systems, refrigeration equipment and much more. The MES106 pumping system solves water transfer needs by removing water from waterbeds, aquariums, non-draining sinks and water standing on basement floors. Pump constructed of proven materials promotes long pump life. Compact design provides easy hookup, application use and storage when not in use.

Myers MESPD50 / MESPD100 Submersible Effluent Pumps. Septic tank effluent, high capacity sump and high head dewatering. Nothing but top quality and ultimate performance from these 2 lines from Myers. The MESDP50/100H handles capacities up to 110 GPM and hear to feet of 50'. The MESPD100 has capacities up to 140 GPM (Gallons per minute) and head to feet of 63'. These are non-clog solids handling pumps capable of passing 3/4" spherical solids. There are multiple models and options including 1/2 hp automatic models that features an exclusive diaphragm pressure switch for the utmost in reliability where a float may hang up. These pumps are completely submersible high head and dual seal pumps for septic tank effluent applications.

Myers MFS Series Pump Switch

Myers MPB Booster Pumps - Serviable High Pressure Performance. If you are looking for durability in a booster pump then look no further for you high pressure application. Perfect for car wash, filtration, reverse osmosis, HVAC, spray systems, agricultural and commercial pressure washing. SignasSeal floating impeller allows for constant operation with no damage to the mechanical seal or motor bearings as well as the hydraulic parts.

Myers Model MRG20 - 2 HP Single-Seal Residential Grinder, 45 GPM -The MRG20 Series Features A Proven Cutter Mechanism And Recessed Impeller Design To Effectively Macerate Typical Sewage Solids Into Fine Slurry. Its Durable Motor Will Deliver Many Years Of Reliable Service.

The Myers Pre-Plumbed Sump Basin Package is a rugged, high quality system ideal for basement sumps and dewatering. The basin features an approved radon-proof design. The unit comes field-ready with a 1-1/2” NPT threaded discharge flange and a 2” NPT vent flange (adaptable to 3”) and includes a 1-1/2” sump check valve

Myers Pumps Model MS33 and MS50 Series Submersible Zinc Sump Pumps, 1/3 and 1/2 HP - Versatile, long-life basement sump pump also appropriate for many light-duty dewatering jobs. Designed for drain water removal or permanent applications with small amounts of debris. Available in 1/3 or 1/2 HP and your choice of vertical or tethered float switch.

Myers MS3S / MSB3S Wastewater Solids Handling Sewage Pumps. Cast iron, single seal submersible sewage pumps perfect for commercial wastewater pumping applications. Carbon cermic type mechanical seal, oil filled motor, upper and lower singl row ball bearing constructions. Sumbersible two vane semi open cast iron impeller.

Myers MS4S / MSB4S Submersible Solids handling Wastewater Sewage Pumps. Single seal light commercial pumping applications. These wastewater solids handling pumps have capacities up to 590 GPM (Gallons Per Minute) with head to feet up to 55'. Depending on the model the horsepower ranges from 3 HP to 7 1/2 HP. These are two vane submersible semi open cast iron impellers.

Myers MS4SD / MSB4SD Submersible Solids Handling Wastewater Sewage Pumps. MSB4SD has a vertical NPT discharge while the MS4SD has a flanged horizontal discharge connection. Perfect light commercial dual seal solids handling pump for waste water. Gallons per minute up to 618 GPM. 1 HP to 7 1/2 HP motor options based on model.

Myers MSCI Heavy Duty Basement Dewatering Submerisble Sump Pumps. The MSCi33 models: 72 GPM, MSCI50 Models: 87 GPM. These basement drainage pumps are great for solids handling up to 3/8" and have a 1 1/2" NPT discharge. Have no fear with these sturdy heavy-duty cast iron construction sump pumps.

Myers MSE50 Submersible Residential Sewage Ejector Pumps. If you are looking for high performance for sewage pumping applications, the MSE50 series will get the job done. These submersible ejector pumps can easily pass 2" solids while pumping up tp 145 gallons per minute (GPM).

Myers MSK Series Sumbersible Sewage Ejector Pumps. Find your perfect pump for your commercial, residential or septic tank effluent pumping application. There is no better option for high capacity sump pump needs. The following lines range from performance and power: MSK50, MSK60, MSK75 and MSK100.

Myers MSKHS Submersible High Head Sewage Ejector Pumps. These submersible high head pumps are specifically manufactured and designed to meet all of the demands or wastewater and sewage handling in commercial and residential applications. There are 3 horsepower option including 1 1/2, 1, 1 1/2 and 2 HP options. The standard discharge is 2" NPT as well as an optional 3" discharge.

Myers MSKV50 Submersible Sewage Ejector Pumps. The perfect pumps for residential sewage pumping applications as well as high capacity sump & septic tank effluent. Wastewater and sewage pumping is critical for residential customers. There are manual and automatic models depending on your specific needs.

Myers MSP40 Submersible Sewage Ejector Pumps. Designed to meet the critical demands of residential and commercial wastewater and sewage handling. MSP40 pump models have a 2" NPT discharge available with a 4/10 HP motor. There are tw configurations, automatic and manual that can handle capacites up to 130 GPM (Gallons Per Minute) and 26 feet of head.

Myers MSP50 Submersible Sewage Ejector Pumps. Superior designed specifically manufactured forwastewater and sewage in commercial and residential applications. These sumbersible ejector pumps are rated for continuous duty. If you ahve a high capacity sump or septic tank effluent, these sewage pumps will get the job done. The standard discharge is 2" NPT but there are 3" options available.The powerful 1/2 HP motor comes in both manual and atumatic models with 150 GPM capacities up to 29 feet of head.

Myers Model MUSP125 Above-Floor Utility Sink Pump Ideal For Basement Wet Bars, Laundry And Utility Sinks.

Myers MW-BP BasinPro 1/2 HP Packaged Sewage System, 135 GPM - Is An Ideal Choice For New Construction Or Retrofit. Pre-Assembled, With 45-Gallon Basin, Residential Sewage Pump With E-Z Switch Liftout Rod And Float Switch.

Myers Model MW Series 2" Solids Handling Heavy-Duty Residential & Commercial Sewage Pump Series (Single or Double Seals) High Head Performance For Demanding Applications. Durable Motor Will Deliver Many Years Of Reliable Service.

Myers Model MW50 - 1/2 HP Residential & Light Commercial Cast Iron Sewage Pump, 135 GPM -Two-Vane Impeller Design Provides Maximum Pump Efficiency. Durable Motor Will Deliver Many Years Of Reliable Service.

Myers MWS37 Series Cast Iron Submersible Sewage Pumps are designed for sewage, effluent and waste water removal, sump drainage, liquid transfer systems, circulation, dewatering and flood control. 3" Solids Handling spherical capability.

Myers MWS5 Series Cast Iron Submersible Sewage Pumps are designed for effluent and wastewater removal, sump drainage, dewatering, flood control. Units have built in thermal overload protection with automatic reset. The mechanical seal and bearings on the motor shaft are permanently lubricated. Stainless steel hardware and a heavy duty lift out ring allow for easy disassembly after extended use.  2" Solids Handling spherical capability.

Myers MWS9 / MWS39 Cast Iron Submersible Sewage Pumps are designed for sewage, effluent and waste water removal, sump drainage, liquid transfer systems, circulation, dewatering and flood control. 2" and 3" solid handling capabilities. Myers expands its successful line of sump, effluent and sewage pumps for plumbing contractors.

Myers Myers MS3SD / MSB3SD Submersible Wastewater, Solids Handling Sewage Pumps. These are the perfect pumps for light commercial applications when dual seals are needed. Capacities up to 385 Gallons Per Minute (GPM). Heads up to 44 feet with horsepower ranging from 1 to 7 1/2 Hp depending on the model number. MSB3SD models have vertical NPT connection while the MS3SD has horizontal flanged dishcharge.

Myers Pump Accessories for Sumbersible Pumps - Wide range and variety of options including: support brackets, check valves, alarms, flanges & switches.

Myers Model P50 / P100 Series - 1/2 & 1 HP Cast Iron Effluent S.T.E.P. Pump Series. Ideal For Effluent Removal, Sump Drainage, Water Transfer, Flood Control

Myers Pentek Intellikit pre specified and packaged constant pressure sytems are designed for residential well water systems. Perfect for maintaining constant water pressure for yoru submersible well pump system. Includes Pentek submersible motor, Myers submersible pump and Pentek intellidrive variable frequency drive (VFD).

Myers Model PRO-Source Pumper 5-1/2 HP Engine-Driven Self-Priming Pump, 134 GPM - an ideal choice for water transfer and supply, sprinkler turf irrigation, dewatering, fire protection, agriculture, light commercial and marine.

Preadator Plus 4" Submersible Well Pump Series. Stainless Steel construction with proven realiability. Typical applications include industrial, commercial, residential, housing communities and clean use farm pumping.

Myers Model QP Series (3/4 thru 3 HP) QP Quick Prime Self-Priming Centrifugal Pumps - The Quick Prime self-priming centrifugal pump is designed for demanding jobs where a lot of water is required over a long period of time. For lawn and garden sprinkling, car washing, or other big cleaning and maintenance jobs, it's built for one purpose only - continuous high performance service.

Myers Model QP50B & QP50B-3 powerful high head 5 HP self-priming pump delivers strong dependable performance for the most demanding jobs.  The heavy duty 84JM motor, brass impeller, and large capacity rugged cast iron pump end deliver reliable and continuous high performance service

S Series 4" Submersible Pumps Powered by Pentek. Unparralelled realiabity in extreme water pumping conditions. Typically pumping applications inclide commercial, industrial as well as housing complexes, homes and farms for clean water use. Stainless steel constructions and high perfomance motors from Pentek.

Myers Model S40HT Series - High-Temperature 1/3 HP Cast Iron Effluent Pump, 45 GPM, Manual or Tethered Switch. The Myers® S40HT series effluent pump is a small, rugged, submersible, cast iron pump with a non-clog vortex impeller and solids handling capability to 3/4". Pumping Applications include: Boiler Blow-Down Pits, Condensate Pits and Hot Water Sumps.

Model S50HT Series - 1/2 HP High-Capacity Cast Iron Effluent Pump, 100 GPM. Used For High-Capacity Sump, Effluent, Boiler Blow-Down. Note: Control Panel #PW217-280 (sold separately) is required for this pump to function.

Myers Model SA-1 / OSA-1 Sump Alarms

Myers Model SPS-4 1/4 HP Thermoplastic Submersible Utility Pump - is the ideal solution for a wide range of water drainage and circulation light-duty applications. Shallow flooded areas can dewatered quickly and efficiently with this powerful and economical utility pump.

Myers Model SR1830 - 4/10 HP Packaged Simplex Sewage System, 95 GPM. The Industry's Best Quality Packaged Sewage System Is Now Factory Pre-Assembled. SRM4A1C Sewage Pump.

Myers SRA Lift-Out System 1-1/4" to 3" - Lift-Out Rail Systems for Myers Sewage, Effluent and Grinder Pumps. The Myers® SRA Lift-Out Package Makes Installation And Service Of Grinder, Sewage And Effluent Pumps Safer And Easier. The SRA Adapts To Nearly Any Vertical Discharge Wastewater Pump From 1-1/4" To 3". Support Brackets Are Stainless Steel For Sewage, Dewatering Or Effluent Pumping Applications

Myers SRM-BP BasinPro™ 95 GPM 4/10 HP Packaged Sewage System Is An Ideal Choice For New Construction Or Retrofit. Pre-Assembled, With 45-Gallon Basin, Residential Sewage Pump With E-Z Switch Liftout Rod And Float Switch.

Myers Model SRM4 - 4/10 HP Cast Iron Sewage Pump, 95 GPM.Power for versatile applications. Long-lasting performance.

Myers Pumps Model SSM33I Series - 1/3 HP Cast Iron Submersible Sump Pump, 31 GPM, Tethered or Vertical Switch. These Pumps are designed For Light Demanding Drainage Applications. Maintenance-Free Operation And Heavy Duty Reliability.

Myers Sump Sewage Repair Parts

Myers SX Submersible Sump Pumps - Hazerdous Environments. These sump pumps are classified Class 1, Division 1 Goup D. Available in 1/2 HP, 1 1/2 HP nad 2 HP configurations. Some features include recessed impeller handles slurry without binding, seak leak probes to reduce costly maintenance and heat sensor to extend pump life. I fyou need to pump contaminated water in hazerdous envirnments the Myers SX series are the heavy duty pumps to mak eit happen. Specifically manufactured to reduce vapor igniting. Depending on yoru model, these are capable of handling solids from 3/4" to 2".

Myers Model SX50 Series - Explosion-Proof 1/2 HP Cast Iron Submersible Sump Pump with Control Panel Package. Rugged Submersible, Explosion-Proof Sump Pumps For Municipal, Commercial And Industrial Use. Durable Motor Will Deliver Many Years Of Reliable Service.

If you need High Flow The Ranger Series 4" Submersible pump is an excellent option.These pumps are specifically designed for high flow / large water volume applications. Suitable for water system pumping applications such as, irrigation, industrial, homes and farms as well as commercial.

Myers VR1 & VR2 Series 1 and 2 HP Automatic Grinder Pumps. These Submersible wastewater pumps are know for shredding the competion as well as mop heads, nylon rope, rags and other materials with ease. The VR1 models are the perfect upgrade to your residential sewage pumping struggles. This is typical for most residential wastewater pumping applications with trash and debris. The VR2 models are ideal for an economical solution for dealing with residential and pressure sewage system. Easy installation, outstanding performance and patented Axial cutter technology. End your troubles pumping domestic waste water without roping or clogging by slicing through solids and trash..

Myers Water System Repair Parts

Myers Model WHR Series -2" Solids Handling Heavy-Duty Residential & Commercial Sewage Pump Series (Single or Double Seals)
The Myers® WHR series sewage pumps feature all cast iron construction to withstand the most extreme conditions. Available in single seal, and double seal models for additional protection against water leakage. The enclosed two-vane impeller provides high-efficiency pumping and will handle stringy, trashy 2" solids without clogging. Designed for sewage and effluent and can be used for applications requiring high heads.

Myers Model WHR5H / 10H / 15H / 20H Series -2" Solids Handling Residential & Commercial Sewage & Effluent Pumps. The WHR5H - WHR20H Series Pumps Are Designed For Use In Light Commercial & Residential Raw Sewage And Effluent Applications. They Deliver Higher Heads Than Standard Sewage Pumps And Will Pass 2" Solids. Recessed Vortex Impeller Provides An Unobstructed Passage In The Volute Case, Allowng The Pump To Handle Stringy Trash Without Plugging The Impeller.